Short Siemens 60lb (630cc) High-Impedance Fuel Injector

nn60lb/h Siemens Deka 4 Mototron High Impedance (Short Style)nnGenuine Siemens / Mototron DEKA IV High Impedance InjectorsnnUltra-Compact, high flow injector at just 48mm end to end! These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.nnThese injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.nnEngine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.nnFeatures:nGenuine, reliable Siemens InjectorsnExcellent response characteristicsnRobust DesignnHigh ImpedancenLow Impedance performance characteristics with High Impedance CompatibilitynnSpecifications:nCoil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)nStatic Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/minnStatic Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/minnGain: 0.11ms/mgnOffset: 0.055msnTurn on time @ 14VDC: 1.14msnTurn off time: 0.85ms @ 600KPanConnector: Bosch EV1nSeries: DEKA 4 ( DEKA IV )nOrifice Type: Multi-orificenSpray Pattern: 30 Degree Spray ConenFactory fitted with Viton upper and lower o-ringsn48mm end to endnnEquivalent Part Numbers:nSiemens FI114962 or 107-962 ( 107962 )nMototron INJ-GAS-002 ( S107)nAccel 74620SnMSD / Edge 2030nn